← Back to Garage Drag to orbit 3D · Click any part to inspect
In development IGVC 2027 Entry

Predator Rover.

Designed and built from scratch by Team Apex at AAST Abo Qir. An autonomous ground rover combining a T-slot aluminum frame, faceted sheet-metal panels, three wide-angle cameras, and an elevated 360° RPLiDAR A2.

More Info

The Platform

Built for the course, not just the spec sheet.

We designed Predator around the practical realities of the Intelligent Ground Vehicle Competition: rough grass, tight barrel chicanes, bright outdoor glare, and strict safety rules. Every bracket, panel, and enclosure in our CAD assembly was built to be easy to service in the field while keeping the batteries low and the sensors high.

15 kg

Total Weight

Lightweight aerospace alloy structure

2-Wheel

Differential Drive

High-torque brushless DC motors

1.8 m/s

Top Speed

~6.5 km/h competition tuned

Jetson

NVIDIA Orin

275 TOPS AI edge inference

360°

LiDAR + Vision

Dense 3D point cloud & depth map

3+ Hours

Continuous Run

24V 20Ah LiFePO4 battery pack

Dimensions 850 mm (L) × 620 mm (W) × 540 mm (H)
Ground Clearance 120 mm all-terrain clearance
Chassis Material T6-6061 Aluminum & Polycarbonate shell
Power Supply 24V 20Ah LiFePO4 with smart active BMS
Safety Systems Dual-redundant E-Stop (Physical latch + 433MHz wireless)
Localization Centimeter-accurate RTK-GPS + 9-DOF IMU + Encoders
Software Stack ROS 2 Humble / Ubuntu 22.04 LTS with real-time nodes

Build · 3D CAD Assembly

Scroll to assemble.

Scroll down to seat each mechanical, electrical, and autonomy module onto the frame.

⭳ Download SolidWorks Assembly (.SLDASM)
ASSEMBLING SUBSYSTEMS… (0%) Inspect 3D Top ↑

Core engineering

How each division built it

A look at how our mechanical, electrical, perception, and software teams split the engineering work on Predator.

01 / Mechanical Chassis & Drive

Frame, Armor & Drivetrain

The structural skeleton and outer shell that keep the electronics safe while rolling over grass, ramps, and pavement.

  • 2020 and 2040 T-slot aluminum extrusion frame with an integrated rear LiDAR mast
  • Faceted sheet-metal front, side, and curved rear panels bolted around the lower perimeter
  • Two high-torque brushless hub-motor drive wheels paired with a rear 360° swivel caster
  • Dedicated internal floor plate and 3D-printed enclosures for the battery and Jetson Orin
02 / Electrical Power & Safety

Power Distribution & E-Stop

Clean, reliable power for the motors and onboard computer, backed by a hardwired emergency stop loop.

  • 24V 20Ah LiFePO4 battery pack housed inside a custom protective center enclosure
  • Regulated DC-DC rails stepping power down cleanly for the Jetson Orin, LiDAR, and cameras
  • Competition-compliant dual E-Stop: a physical red latch button plus a wireless remote cutoff
  • Separated power and signal routing to keep motor noise out of the sensor lines
03 / Perception Sensors & Vision

Cameras, LiDAR & Positioning

The eyes of the rover—combining a mast-mounted laser scanner with three cameras so there are no blind spots.

  • 360° RPLiDAR A2 mounted at the top of the rear mast for an unobstructed view of obstacles
  • Three 4K wide-angle USB cameras (front, left, and right) aimed at painted lane lines
  • Rear deck-mounted GPS module for outdoor waypoint navigation across the course
  • 9-axis IMU and wheel encoders feeding real-time heading and speed back to the controller
04 / Autonomy ROS 2 & AI

ROS 2 Navigation Stack

The software running on the NVIDIA Jetson Orin that turns raw camera frames and laser scans into steering commands.

  • ROS 2 Humble nodes on Ubuntu 22.04 splitting camera vision, LiDAR mapping, and motor control
  • Extended Kalman Filter (EKF) combining wheel odometry, IMU, and GPS into a steady pose estimate
  • Live local costmap that merges painted lane boundaries with LiDAR obstacle points
  • Path planner that smoothly steers around barrels while keeping the rover centered in the lane

Performance goals

IGVC 2027 competition targets

Benchmark metrics that Predator is engineered to achieve on the competition field.

< 0.3 m

Waypoint Accuracy

Centimeter-precision waypoint navigation across GPS coordinates.

100 ms

Obstacle Avoidance

Dynamic detection and trajectory re-planning when barriers appear.

15° Slope

Grade Incline

Stable climb and descent over course ramps and natural slopes.

99.8%

Lane Detection

Continuous tracking of solid and dashed white course boundaries.

Back Predator’s journey

Sponsorship funds sensor procurement, custom CNC fabrication, and travel to IGVC 2027.